Waterco Electrochlor Mineral 2500 Chlorinator

Free Delivery available over $000,00

Waterco Electrochlor Mineral 2500 Chlorinator

Waterco’s Electrochlor Mineral Chlorinator makes your pool smarter by automatically taking care of sanitisation, filtration and auxiliary equipment so you don’t have to.

Features

Easy-to-read display screen: a snapshot of your pool’s temperature and everything you need to know about your pool’s current functions are clearly displayed in one place.

Variable speed pump compatibility: automatically changes the speed of your Waterco variable speed pump at the desired cycle if required.

Dual-pump control: control another pump in conjunction with a variable speed pump simultaneously, which means you can operate your in-floor pool cleaning pump or pressure pool cleaner at the same time as your main pool pump.

Actuator control: connect a valve actuator to divert water flow and activate the correct speed on a variable speed pump for your pool’s water feature or for in-floor pool cleaning.

Easily manage auxiliary equipment: switch on and off lights, ozone generators and other auxiliary equipment using a secondary General Purpose Outlet (GPO) which can be activated independently or set in conjunction with other pool equipment.

No water flow detection: Electrochlor is smart enough to detect if there is no flow to the pool and adjusts the speed of a variable speed pump to overcome low water flow. If adequate water flow is not restored, the pump will switch off to prevent potential damage to your pool equipment.

Low chlorine mode: low chlorine production can be easily activated via a pool cover or a pool controller by sending a signal to the chlorinator.

Built-in alarm system: Electrochlor takes the guesswork out of maintaining pool equipment by displaying alarm messages in the event of a malfunction.

A quick troubleshooting: a diagnostic menu helps service technicians quickly identify potential issues.

A salt chlorinators main function is to produce chlorine for the pool, which is essential in preventing the recurrence of common strains of algae and bacteria. The chlorine then turns back into salt and the system continues as long as the generator is functioning properly. This simple yet sophisticated pool care solution consists of a Power Pack (power supply) and an electrolytic salt cell where the chlorine is produced.

Energy Saving

Electrochlor uses the latest Switch Mode Power Technology to increase energy efficiency by over 50%, significantly reducing power consumption. Electrochlor draws less current and this translates to high power conversion and less energy wastage, without compromising chlorine output.

Special Features explained

Battery backup power pack

Automatically saves your settings in the event of a power outage.

Pump protection

In case water flow is not detected, Electrochlor protects the pump by shutting it down, and then automatically displays the corresponding alarm.

Salt alarms

If the salt level in the pool water is too low or too high, Electrochlor automatically reduces the output and displays the corresponding alarm. A digital time stamp of high salt levels is also recorded. Electrochlor also monitors the pool’s temperature to eliminate false low salt level readings often attributed to low pool temperatures.

Dual general power outlets (GPO) Two GPOs are included – one for the pool pump and another for a pool light or auxiliary device that needs to be operated under a timer. Note: Please refer to Electrochlor’s technical specifications for the maximum allowable load. Variable speed pump control Easily control a variable speed pump and switch it on and off by connecting it to Electrochlor via a communication cable. Note: This feature is only enable when a Waterco variable speed pump is installed.

Control two pumps

When a Waterco variable speed pump is connected to Electrochlor with a pump control cable, the pump can also be linked to an independent dual general power outlet such as a pressure cleaner pump or in-floor cleaning pump.

Pool water temperature display

A temperature sensor displays pool water temperature on an LCD screen

Super chlorination function

Chorine production is raised to 100% during a 24-hour period to superchlorinate the pool, then returns to its pre-set operating condition once completed.

Spa mode/low chlorine output

This mode reduces chlorine production to 10%, whilst active. Interlocking functions Program, activate and simultaneously control multiple pool equipment such as the control valve, and determine the minimum required water flow for ancillary functions.

Self-cleaning electrolytic salt cell

Reverses the polarity of the voltage to clean calcium build-up off its electrodes. This extends Electrochlor’s lifespan and ensures it operates at maximum efficiency.

Four independent timers

Multiple timers allow you to control the pump, pool light and auxiliary equipment conveniently from one compact unit.

Low-flow condition

In the event of a “no-flow” condition, Electrochlor will compensate by increasing the pump speed. If the “no-flow” condition is resolved, it will maintain the new speed to keep the pool pump running. Note: This feature is only enabled when a Waterco variable speed pump is installed.

Diagnostic menu A comprehensive diagnostic screen allows the pool technician or pool owner to quickly assess Electrochlor’s operational status at any time.

Salinity Level – Operation:

TDS Levels (ppm)

Minimum = 4,000

Optimum = 5,500

Maximum = 6,000 Note:

Low salinity level will reduce the life of the chlorinator cell and lead to low chlorine production

Three Year Warranty for Domestic Use

Electrochlor 3 years Chlorinator cell 3 years Power pack 3 years

Available in-store only,  must be installed by trained technicians and we will quote installation for you 

Warranty

3 years

Model

Electrochlor 2500

Chlorine Output

25g

Self Cleaning

Yes

Backlit LCD screen with temperature display
Energy-saving, intelligent power pack
Dual timer controlled power outlets

Best Price
Guarantee

Lifetime
Support

Product
Warranty

Fast Delivery
Available

"Our staff give you the individual attention that only comes from dealing with a local family owned business"

Open Everyday 9am - 5pm

Email Nicole

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

Enquire Now!

This field is for validation purposes and should be left unchanged.

Get In Touch!

This field is for validation purposes and should be left unchanged.

Ladders & Rails Enquiry!

Daisy Pool Cover

"*" indicates required fields

Please feel welcome to also email us a diagram along with the answers below
Using the how to measure diagram, please provide the size of your pool in metres, please provide Pool Width (A) and Pool Length (B) in metres
Please include total length (B) in metres and total width (A) in metres if you have not listed it below the diagram
Does your pool have a step? Please note if your step is at the end of the pool and not on the side, you need to include it in the overall length of the pool as they cannot add to the length of the blanket for a step, only the width*
If your pool has a step is it on the RHS or LHS when looking from the shallow end of the pool?
What cover shall we quote you on? Note the thickest 525 micron covers do last longer*
If you need a quote on a roller, which roller shall we quote? If you choose one that does not suit the size of your pool, we will quote the closest option.*

If you already have a roller, do you need the attachment kit (refit kit) to reattach your new blanket to your existing roller? Please note if you are ordering a roller it will come with an attachment kit included*
If you already have a roller, do you need an over cover to protect the blanket once rolled up. You will likely already have one, but some customers find it has worn out so they need a new one to protect their new blanket. If you need an over cover we need to know the length of the roller tube in metres. Please note if you are ordering a roller it will come with an over cover included.*
Picture shows over cover (and roller leg)
The white material is the over cover protecting the blanket when rolled up
Delivery is $27.50 or you can choose to collect from Daisy in Welshpool
Do you want Daisy to install your item/s? We can organise the professionals at Daisy to install your items for you if you live in the metro area.*
Send me a copy of my responses.*
This field is for validation purposes and should be left unchanged.