Waterco’s Automatic Water Leveller adds to the leisure time of the pool owner by eliminating the need to keep an eye on the water level.
- Fully automatic operation
- Overflow connection
- Child resistant lock down lid assembly.
- Simple servicing and connection
The Waterco Automatic Water Leveller is placed in the ground at a convenient location near the pool and plumbed to a separate pool inlet and also to the fresh water supply. The leveller remains inactive until the pool water level drops below or rises above the correct point at which time it will restore the right level by adding or draining water as the situation requires
Skimmer Box Extension Ring If the unit is to be installed so that the deck lid will not be secured to the skimmer body, Waterco recommends using a skimmer Extension Ring (624105) for trouble free installation. Using the Extension Ring will prevent misalignment of the Deck Ring and the skimmer body. This will eliminate problems caused by concrete intruding into the skimmer box cavity.
The Extension Ring will ensure there are no problems inserting/removing vacuum plates or other similar devices.
An individual Extension Ring offers an extension of 60mm and can be piggybacked to give further extension of any multiples if required. (eg 120mm , 180mm etc).
The Extension Ring sits snugly on top of the Autoleveller between the Autoleveller body and the Deck Ring and is strong enough to hold its shape during concreting.
The Deck Ring also can be secured to the Extension Ring if required. Warranty Waterco proudly support their Auto Pool Leveller with a full 12 months parts and labour warranty.
